Sachets and pouches
Feed, probiotics, pond treatments and powders, packed one dose at a time.
Aquaculture sachets ›Products
Cold water soluble PVA film. Dissolves at room temperature.
Transparent PVA film for packs that go straight into water: sachets, pods, tablets and pre-measured chemicals. Supplied in rolls for your packing machine, made in Coimbatore from our own patented resin.
- Room temperaturedissolves without heating
- From 25 micronto your requirement
- Plain or embossedtransparent film
Where it is used
One film, many jobs that end in water.
Agrochemical packs
Pre-measured packs that dissolve in the spray tank, so nobody opens or pours the product by hand.
Agrochemicals ›Dye and chemical packs
Textile dyes and process chemicals dosed into the bath in the same amount every batch.
Textiles and apparel ›Cistern tablets and washing pods
Film wrapping for in-cistern tablets and washing pods that dissolves when the product meets water.
Wastewater treatment chemicals
Pre-measured packs of treatment chemicals that go straight into the tank, with less handling for plant operators.
Concrete fibres
Pre-weighed packs of fibres that go into the mixer whole, so the pack dissolves into the mix.
Cold or hot?
Choose the grade by when it should dissolve.
This page
Cold water soluble
Dissolves in water at room temperature. Choose it when the pack goes straight into a pond, tank, cistern, mixer or wash water.
Also available
Hot water soluble
Softens in cold water and dissolves above 65°C. Choose it when the bag must stay closed until it meets hot water, such as hospital laundry bags.
Hot water soluble PVA film ›Two ways to order
Ready-made pouches or film rolls for your machine.
Ready-made pouches
We supply empty pouches cut to your size. Your team fills them and seals them on your own heat sealing machine.
- Standard 5 × 5, 5 × 7 and 7 × 7 inches, or custom
- Hot or cold water grade, in your micron
- Plain or embossed film
- Suits manual and semi-automatic filling
Film rolls for FFS machines
We supply PVA water soluble film in rolls. Your form-fill-seal machine forms the sachet, fills it and seals it in one run.
- Hot or cold water grade, from 25 micron
- Plain or embossed film
- Suits high-speed automatic packing lines
Not sure which suits your line? Tell us how you pack today and we will suggest the right format.
Specifications
Cold water soluble PVA film specifications.
Typical values from our technical data sheet. Every order is made to your width and micron.
Need the full technical data sheet? Ask us and we will share it with your quote.
| Dissolves | In water at room temperature |
|---|---|
| Thickness | From 25 micron, to your requirement |
| Finish | Plain or embossed |
| Colour | Transparent |
| Formats | Film rolls for form-fill-seal (FFS) machines, or ready-made pouches |
| Tensile strength | 12 to 18 MPa |
| Elongation at break | 150 to 200% |
| Surface resistivity | 107.5 to 1010 ohm/cm² (anti-static) |
| Oxygen transmission | 0.0235 mL/100 in²/day |
| Material | GreenPlast resin; no conventional plastics; non-toxic |
Made in our plant
From our resin to your roll.
We blow the film from our own patented resin and wind it onto rolls in our Coimbatore plant.
Buyers with form-fill-seal machines order these rolls directly. Others order ready-made pouches and sachets cut from the same film.
Why buyers trust it
Our own resin, independently tested.
- PatentIndian Patent No. 508991Our transparent water soluble PVA resin, granted by the Patent Office, Government of India.
- Independent testCIPET, ISO 1708891% biodegradation in 165 days. Passed disintegration, plant growth, earthworm and heavy metal tests.
- CertificationTNPCB and CPCBCertified by the Tamil Nadu Pollution Control Board and the Central Pollution Control Board.
Questions buyers ask
FAQs about Cold Water Soluble PVA Film
Anything else? Call +91 99430 32500 or message us on WhatsApp.
What is cold water soluble PVA film?
A thin, transparent film made from PVA (polyvinyl alcohol) that dissolves completely in water at room temperature. Products packed in it go straight into water, and the film dissolves and releases what is inside.
At what temperature does it dissolve?
At normal room temperature, so it works in ponds, tanks, cisterns, mixers and wash water without heating. If your product must stay sealed until it meets hot water, see our hot water soluble PVA film instead.
What thickness can you supply?
From 25 micron, made to your requirement. For aquaculture sachets our standard is 35 micron. Tell us what you are packing and the weight per pack, and we will confirm the right micron with your quote.
Do you supply it in rolls?
Yes. We supply cold water soluble PVA film in rolls for form-fill-seal (FFS) machines and other high-speed packing lines. We also make ready-made pouches if you prefer to fill and heat seal them yourself.
Is the film plain or embossed? Coloured?
The film is transparent and is available plain or embossed. We do not supply coloured or printed film.
Does it leave plastic or microplastics behind?
No. GreenPlast film is made from PVA, industrial starch and vegetable oil derivatives, with no conventional plastics. It breaks down into carbon dioxide, water and biomass. CIPET, a Government of India institute, measured 91% biodegradation in 165 days under ISO 17088.
How should the film be stored?
Keep it in the original packing, indoors, in a dry place and away from water and moisture until use.
How do I get a price?
Send the format, width or pouch size, micron and quantity through the quote form or on WhatsApp. We reply within one working day with pricing and lead time.
Related products
Pouches or hot water film.
Get a quote
Get a price for cold water soluble film.
Share your product, size and quantity. Our team will reply within one working day with weight per piece, pieces per kg, pricing and lead time.