Construction

Concrete fibres by the bag. Straight into the mixer.

Pack each dose of fibres or admixture in a PVA water soluble bag. The site team drops the sealed bag into the mixer, the film dissolves in the mix water, and nobody cuts sacks open or weighs out fibres by hand.

  • Cold water gradedissolves in the mix
  • One bag, one dosepre-measured
  • Bags or film rollsto your size
Rolls of cold water soluble PVA film in the GreenPlast plant, Coimbatore

Why fibre and admixture makers use soluble bags

The right dose in every batch, no empty sacks on site.

Exact dosage

Each bag holds a measured dose, for example one bag per cubic metre, so every batch gets the amount specified.

No opening by hand

The sealed bag goes into the mixer whole. No cutting sacks, no loose fibres blowing around the site.

No packaging waste

The film dissolves with the dose, so there is no empty sack to collect or dispose of after the pour.

Made to your size

Bag size and film thickness are made to your fill weight and handling, as bags or as film rolls for your own bagging line.

Micro or macro fibres

Which fibres, which soluble pack?

Fibre makers pack the two main kinds of synthetic fibre in different ways. This is how leading brands describe them in their published data sheets.

Micro fibresMacro fibres
What they doHelp reduce plastic shrinkage crackingStructural reinforcement, replacing welded mesh and light steel bars
Typical doseAbout 600 to 900 g per cubic metreAbout 5 to 9 kg per cubic metre
Usual soluble packOne pre-measured soluble bag per cubic metre, often 600 g or 900 gFibre pucks bound with soluble tape in 5 kg boxes, or soluble bags of about 0.5 to 1.5 kg
What we supplySoluble bags made to your dose and sizeSoluble bags made to your dose and size, or film rolls for your own bagging line

Typical values from published product data sheets. Your dose and bag size come from your own product and mix design.

From our plant to the pour

From bag to mixer in four steps.

  1. Fill and seal

    You fill each soluble bag with one measured dose of fibres or admixture and seal it, or we supply film for your own bagging line.

  2. Keep it dry

    Store the sealed bags in their outer cartons, off wet ground, until they are used on site.

  3. Add the bag

    The site team adds the sealed bag to the mixer, as your mixing instructions say. Nobody opens or weighs anything.

  4. It dissolves

    The cold water soluble film dissolves in the mix water and the contents mix in with the concrete. No sack is left over.

Ready to quote

What to send us for a quote.

With these details we reply within one working day with pricing and lead time. If you already use soluble bags, a photo and the size of your current bag is the quickest start.

  • Your product: micro fibres, macro fibres or an admixture, and its form (loose fibres, pucks, powder).
  • Fill weight per bag: the dose that goes into one bag.
  • Bag size: width and height, if you already have one, or we suggest a size.
  • Thickness: the micron you use today, or how the bags are handled and stored.
  • Format: ready-made bags, or film rolls with the roll width of your machine.
  • Quantity and delivery: bags per order, how often you reorder, and your city or country.

Why buyers trust it

Our own resin, independently tested.

  • PatentIndian Patent No. 508991Our transparent water soluble PVA resin, granted by the Patent Office, Government of India.
  • Independent testCIPET, ISO 1708891% biodegradation in 165 days. Passed disintegration, plant growth, earthworm and heavy metal tests.
  • CertificationTNPCB and CPCBCertified by the Tamil Nadu Pollution Control Board and the Central Pollution Control Board.

Packing fibres or admixtures by the dose? Send your fill weight per bag, bag size and quantity on WhatsApp. We reply within one working day.

Questions buyers ask

FAQs about PVA water soluble packaging for construction

Anything else? Call +91 99430 32500 or message us on WhatsApp.

How do water soluble bags for concrete fibres work?

The measured fibres or admixture are sealed in a PVA water soluble bag. The whole bag goes into the mixer, the film dissolves in the mix water, and the contents mix into the concrete.

Which grade is used?

Cold water grade, which dissolves in water at room temperature, so the bag opens in the mixer without heating.

What bag sizes do you make?

Bags are made to your fill weight and dimensions, from small doses to larger bags. Tell us the dose per bag and how the fibres are packed, and we will suggest a size.

How thick should a fibre bag be?

From 25 micron, to your requirement. A heavier dose of fibres, or rough handling on site, needs thicker film. Tell us the fill weight per bag and we will confirm the micron with your quote.

Can we use our own bagging machine?

Yes. Besides ready-made bags, we supply cold water soluble film in rolls in the width your machine takes.

Is there any packaging waste after the pour?

No empty sack to dispose of: the bag dissolves in the mix water with its contents. The film is made from PVA, industrial starch and vegetable oil derivatives, with no conventional plastics.

Can you supply fibre makers in Europe?

Yes. Our film and bags have been shipped to the UK and Croatia. Specifications in mm, shipping terms and lead time for European buyers are on our export page.

How do we get a price?

Bags are priced per piece and film per kg. Send the bag size or film width, thickness and quantity through the quote form or on WhatsApp, and we reply within one working day with pricing and lead time.

Get a quote

Get a price for your construction packaging.

Share your product, size and quantity. Our team will reply within one working day with pricing and lead time.

Finish

Fibre bags are made to your dose: enter the width and height of the bag you use today (in inches; 1 inch = 25.4 mm) and its micron. Not sure? Enter your best estimate and we confirm the size with your quote.

Required. We use your details to reply to this request, and for product news only if you tick the box.